Aero Resources, Inc. is marketing three (3) different sunvisor systems by: A.R.F.C., Clear View, and Rosen. All three of these systems use transparent tinted acrylic plastic which reduces the sun's UV rays while providing clear vision for observation of outside traffic. They provide several axises of movement to enable you to position the sunvisors between your eyes and the sun during daylight hours or store them above the windshield when not in use. Click on your aircraft type to determine which systems are available for your airplane.

A.R.F.C. SUNVISORS

A.R.F.C. sunvisors are designed exclusively for Cessna airplanes and use the original OEM Cessna brackets. Just remove the original plastic cessna sunvisors and replace them with the new FAA/PMA'd tinted A.R.F.C. sunvisors. Most of the Cessna single engine series of aricraft from the Cessna 150 to the Cessna 210 are covered, plus the Cessna 337 in-line twin engine models. Prices range from $139.95 to $149.95 plus shipping and handling.

CLEAR VIEW SUNVISORS

Clear View sunvisors are FAA/PMA'd for Beechcraft single engine Model 33, 35, and 36 airplanes and Beechcraft twin engine Model 55, 56, 58, and 95 airplanes. FAA/PMA's are awaiting approval for Cessna and Piper models. Non-STC'd versions of the sunvisors are available for experimental aircraft only. The visors feature three axises of movement for precise placement. Brass and stainless steel on aluminum fitting assures smooth, non-binding operation. These visors cost $289 per set plus shipping and handling.

ROSEN SUNVISOR SYSTEMS

Rosen's See-thru Safety, See-thru Comfort sunvisors are well known for quality and utility. The sunvisors are available for a wide variety of aircaft in two basic designs, the Monorail and NSA (New Swinging Arm). The Monorails are designed primarily for the larger turbo-prop and jet cockpits and feature vertical swivel; the lenses turn 360 degrees and can be pivoted to literally any angle. Rosen NSA Sunvisor Systems are mounted on an adjustable, articulating arm and can be quickly and easily positioned for maximum benefit. Rosen also offers a Universal Sunvisor which can be easily installed in almost any experimental aircraft with a solid surface above the windshield. Their exclusive adjustable swivel pin and multiple mounts allow installation on horizontal, vertical, or angled surfaces. Prices vary widely based on the size of aircraft and sunvisor design.

Rosen NSA sunvisors were specifically designed to meet the needs of the general aviation pilot. This patented NSA mounting arm features: (1) components that are precision machined from 6061-T6 aluminum, (2) multi-axis adjustability that allows complete cockpit coverage no other visor can offer, and (3) multiple tensioning points that can be adjusted to the pilot's preference. Rosen NSA lenses are made of the same optical grade material used in their Commercial and Corporate jet sunvisor systems. This unique material was selected for its superior features which include: (1) no optical or color distortion, (2) blocks 99% of damaging UV light, (3) blocks 75% of heat producing infrared light, and (4) meets aviation burn test requirements. With STC'd visors for almost every certified general aviation aircraft, chances are you will find a Rosen visor that meets or exceeds your expectations.

ROSEN SUN SHADES AND MISCELLANEOUS

Rosen Sun Shades are a highly effective solution to excessive heat build up in your aircraft cockpit. These sun shades suction-cups to any flat, smooth surface. When not in use they fold small enough to fit inside any storage compartment. The Rosen CrewView Convex Mirror is a handy convex mirror that provides an excellent view of the cabin and passengers from the cockpit. A 1" x 1-3/4" mirror is mounted on a sliding clamp block which can be positioned anywhere along the sunvisor rail of aircraft that have a Rosen Monorail Sunvisor System. Also listed are Rosen Replacement Parts, which include knobs and sunvisor lenses (excluding metal strip).